wave
plus1.440.834.5400-lang
CLOSE
x
DuraBlue Sizing Calculator
-
CATERGORIES [+]

DuraBlue Bushing Interference Fit Sizing Calculator.

Red Border are Required Fields
DURABLUE POSITION: Data for sizing:
 DURABLUE POSITION:
Housing ID
(smallest dimension):
   
Shaft OD
(largest dimension):
Machining Tolerance:
(default: 0.004" / 0.1016 mm)
1. INTERFERENCE AMOUNT
2. RUNNING CLEARANCE
3. MACHINED ID
4. MACHINED OD
5. ½ TOLERANCE BAND
(Machining tolerance x 0.500)
 High ID dimension
(MACHINED ID + ½ tolerance band)
 Low ID dimension
(MACHINED ID - ½ tolerance band)
 High OD dimension
(MACHINED OD + ½ tolerance band)
 Low OD dimension
(MACHINED OD - ½ tolerance band)
6. MACHINED OD after 30 min. freezing in LN2
(MACHINED OD x .995)
FITS STOCK TUBE SIZE:    
CODE:    
ID:  in mm    
OD:in mm    
LENGTH:    
+ ADD ANOTHER DURABLUE POSITION
DURABLUE POSITION: Data for sizing:
 DURABLUE POSITION:
Housing ID
(smallest dimension):
   
Shaft OD
(largest dimension):
Machining Tolerance:
(default: 0.004" / 0.1016 mm)
1. INTERFERENCE AMOUNT
2. RUNNING CLEARANCE
3. MACHINED ID
4. MACHINED OD
5. ½ TOLERANCE BAND
(Machining tolerance x 0.500)
 High ID dimension
(MACHINED ID + ½ tolerance band)
 Low ID dimension
(MACHINED ID - ½ tolerance band)
 High OD dimension
(MACHINED OD + ½ tolerance band)
 Low OD dimension
(MACHINED OD - ½ tolerance band)
6. MACHINED OD after 30 min. freezing in LN2
(MACHINED OD x .995)
FITS STOCK TUBE SIZE:    
CODE:    
ID:  in mm    
OD:in mm    
LENGTH:    
+ ADD ANOTHER DURABLUE POSITION
DURABLUE POSITION: Data for sizing:
 DURABLUE POSITION:
Housing ID
(smallest dimension):
   
Shaft OD
(largest dimension):
Machining Tolerance:
(default: 0.004" / 0.1016 mm)
1. INTERFERENCE AMOUNT
2. RUNNING CLEARANCE
3. MACHINED ID
4. MACHINED OD
5. ½ TOLERANCE BAND
(Machining tolerance x 0.500)
 High ID dimension
(MACHINED ID + ½ tolerance band)
 Low ID dimension
(MACHINED ID - ½ tolerance band)
 High OD dimension
(MACHINED OD + ½ tolerance band)
 Low OD dimension
(MACHINED OD - ½ tolerance band)
6. MACHINED OD after 30 min. freezing in LN2
(MACHINED OD x .995)
FITS STOCK TUBE SIZE:    
CODE:    
ID:  in mm    
OD:in mm    
LENGTH:    
+ ADD ANOTHER DURABLUE POSITION
DURABLUE POSITION: Data for sizing:
 DURABLUE POSITION:
Housing ID
(smallest dimension):
   
Shaft OD
(largest dimension):
Machining Tolerance:
(default: 0.004" / 0.1016 mm)
1. INTERFERENCE AMOUNT
2. RUNNING CLEARANCE
3. MACHINED ID
4. MACHINED OD
5. ½ TOLERANCE BAND
(Machining tolerance x 0.500)
 High ID dimension
(MACHINED ID + ½ tolerance band)
 Low ID dimension
(MACHINED ID - ½ tolerance band)
 High OD dimension
(MACHINED OD + ½ tolerance band)
 Low OD dimension
(MACHINED OD - ½ tolerance band)
6. MACHINED OD after 30 min. freezing in LN2
(MACHINED OD x .995)
FITS STOCK TUBE SIZE:    
CODE:    
ID:  in mm    
OD:in mm    
LENGTH:    
IMPORTANT NOTE: This bearing sizing calculator assumes that the DuraBlue material has been climatized to the same ambient temperature of the machine shop which is in the range of 50-80° F (10-27° C). If your machine shop operates at different ambient temperatures please consult with Duramax Marine® engineering department at: +1-440-834-5400
CUSTOMER INFORMATION:
 Project / Vessel Name:
 Customer Name:
*Email:
 Date:
*Creates PDF, and submits form to Duramax Marine

Duramax Marine LLC is an ISO 9001:2015 certified company.
17990 Great Lakes Parkway, Hiram, Ohio 44234 U.S.A.  |  PHONE +1 440.834.5400  |  FAX +1 440.834.4950 
Home  | Literature  | Careers  | SITEMAP

close